Fault code reading: Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading.
Measure Values: Displays on the screen the values of the different sensors connected to the ECU. It depends on each system.
ECU Data: These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.
Vehicle Technical Data: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values…
Vehicle maintenance: Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained.
System | |||||||
---|---|---|---|---|---|---|---|
Audio system | Audio 2.0, Audio system | ||||||
Audio system | Radio | ||||||
Brakes | ABS MK 25, Anti-lock hydraulic braking system | ||||||
Brakes | ABS/ASR MK 25, Anti-lock hydraulic braking system | ||||||
Brakes | ESP MK 25, Anti-lock hydraulic braking system with stability control | ||||||
Central computer | BC 2.0, Body computer | ||||||
Climate HVAC | CU 2.1, Climate control | ||||||
Electronic module | CAN Bus, Communication interface | ||||||
Electronic module | DBE, Roof control | ||||||
Electronic module | PDK 2.0, Parking help system | ||||||
Electronic module | PDK, Parking help system | ||||||
Engine | EDC 16 U1, Electronic Diesel Control | ||||||
Gearbox | GS 09G/K/M, Automatic gearbox | ||||||
Heater | CU 1.0, Auxiliary heater | ||||||
Heater | CU 3.0, Auxiliary heater | ||||||
Instrument cluster | INS 1.0, Instrument cluster | ||||||
Maintenance | Service 1.0, Maintenance system | ||||||
Safety | Airbag 6, Supplemental Restraint System |