Coverage

FIND OUT ALL OUR COVERAGE
What are you looking for?
Fault code reading
Fault code reading
It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time.
Measure Values
These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.
ECU Data
Vehicle Technical Data
Vehicle Technical Data
Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained.
Vehicle maintenance
Diagnostics warning
Diagnostics warning
Additional actions
Additional actions

Fault code reading: Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading.

Measure Values: Displays on the screen the values of the different sensors connected to the ECU. It depends on each system.

ECU Data: These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.

Vehicle Technical Data: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values…

Vehicle maintenance: Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained.

SAE J1939

System Fault code reading Measure Values ECU Data Vehicle maintenance Diagnostics warning Additional actions
Antipollution SA 61, Exhaust gas treatment system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antipollution SA 81, Emissions treatment system, intake gas It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antipollution SA 82, Emissions treatment system, outlet gas It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antipollution SA 85, Diesel particulate filter It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antipollution SA 86, Emissions treatment system, intake gas It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antipollution SA 87, Emissions treatment system, outlet gas It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antitheft SA 29, Safety system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antitheft SA 52, Ignition control module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Antitheft SA 53, Ignition control module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Audio system SA 76, Radio It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 12, Brakes, steering axle It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 13, Brakes, transmission shaft It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 14, Brakes, transmission shaft It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 15, Engine brake It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 16, Retarder It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 41, Exhaust brake system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 44, Exhaust brake system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 45, Retarder It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Auxiliary brakes SA 80, Parking brake controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Brakes SA 11, Braking system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Central computer SA 17, Adaptive Cruise Control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Central computer SA 39, Vehicle control unit It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Chassis module SA 71, Chassis controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Chassis module SA 72, Chassis controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Climate HVAC SA 25, Climate Control System It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Climate HVAC SA 58, Heating, Ventilation, Air Conditioning It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Compressed air processing SA 48, Electronically Controlled Air Management It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS SA 24, Data Logging Unit (On-Board Data Logger) It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS SA 251, Data Logging Unit (On-Board Data Logger) It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS SA 28, Navigator It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS SA 74, Telephone It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Data registration, telematics and FMS SA 75, Satellite communication It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 100, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 101, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 102, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 103, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 104, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 105, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 106, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 107, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 108, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 109, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 110, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 111, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 112, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 113, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 114, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 115, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 116, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 117, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 118, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 119, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 120, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 121, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 122, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 123, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 124, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 125, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 126, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 127, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 128, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 129, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 130, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 131, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 132, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 133, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 134, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 135, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 136, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 137, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 138, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 139, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 140, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 141, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 142, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 143, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 144, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 145, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 146, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 147, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 148, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 149, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 150, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 151, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 152, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 153, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 154, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 155, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 156, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 157, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 158, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 159, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 160, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 161, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 162, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 163, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 164, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 165, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 166, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 167, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 168, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 169, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 170, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 171, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 172, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 173, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 174, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 175, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 176, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 177, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 178, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 179, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 180, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 181, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 182, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 183, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 184, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 185, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 186, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 187, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 188, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 189, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 190, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 191, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 192, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 193, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 194, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 195, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 196, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 197, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 198, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 199, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 200, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 201, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 202, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 203, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 204, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 205, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 206, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 207, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 208, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 209, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 210, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 211, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 212, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 213, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 214, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 215, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 216, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 217, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 218, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 219, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 220, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 221, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 222, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 223, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 224, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 225, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 226, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 227, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 228, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 229, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 230, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 231, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 232, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 233, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 234, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 235, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 236, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 237, Self-Configurable defined assignment It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 239, Hitch position control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 245, Non virtual terminal display (implement bus) It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 246, Armrest control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 26, Alternator and electric load system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 27, Aerodynamic control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 30, Electrical system controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 34, Auxiliary valve control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 37, Gateway It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 43, On-board diagnosis unit It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 46, Hydraulic pump controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 49, Cabin module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 50, Cabin module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 54, Seat control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 57, Water pump controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 62, Electronic Stability Program It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 63, Oil sensor It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 66, Rail control (load-unload) It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 67, Converter clutch It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 70, Engine valve controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 73, Propulsion battery charger It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 78, Fan clutch controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 79, Seat control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 89, Atmospheric pressure sensor It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 92, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 93, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 94, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 95, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 96, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 97, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 98, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Electronic module SA 99, Reserved assignment by SAE It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Engine SA 0, Engine Control Module It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Engine SA 1, Engine control system, 2 It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Engine SA 18, Fuel system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Engine SA 2, Turbocharger It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Engine SA 31, Start-up system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Gateway SA 240, Tractor Electronic Control Unit (TECU) It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Gearbox SA 3, Transmission It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Gearbox SA 4, Transmission It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Gearbox SA 5, Gearbox lever It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Gearbox SA 59, Transmission display It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Gearbox SA 6, Gearbox lever It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Gearbox SA 60, Transmission display It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Harvest system SA 241, Tailings volume monitoring It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Harvest system SA 242, Header control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Harvest system SA 243, Harvest yield control system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Harvest system SA 244, Product moisture control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Heater SA 68, Auxiliary heater It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Heater SA 69, Auxiliary heater It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Hybrid systems SA 90, Common Powertrain Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Hydraulic systems SA 35, Hitch control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Instrument cluster SA 23, Info Instrumentation It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Instrument cluster SA 40, Instrument cluster - display It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Instrument cluster SA 65, Driver Information Centre It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Instrument cluster SA 84, Cab display It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Lighting SA 55, Lighting, operator's controls It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Multiplex SA 33, Body computer It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Power take-off SA 36, Power take-off It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Power take-off SA 7, Power take-off It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Powertrain SA 10, Transmission shaft It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Powertrain SA 9, Transmission shaft It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Powertrain SA 91, Common Powertrain Controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Safety SA 42, Collision avoidance system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Safety SA 83, Supplemental Restraint System It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Safety SA 88, Supplemental Restraint System, 2 It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Screen SA 38, Virtual terminal display (implement bus) It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Steering SA 19, Steering controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Steering SA 56, Rear steering axle controller It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Steering SA 77, Steering Column Unit It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Steering SA 8, Electronically-controlled steering axle It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Suspension SA 20, Suspension, steering axle It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Suspension SA 21, Suspension, transmission shaft It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Suspension SA 22, Suspension, transmission shaft It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Suspension SA 47, Suspension management system It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Suspension SA 64, Suspension electronic management It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions
Wheel pressure control SA 51, Tyre pressure control It allows the user to read the fault codes stored in the control unit, and to access all the information associated with it. In addition, from this version, it also allows the user to know the vehicle status regarding the fault codes active different control units. It allows the user to access the different measurements managed by the control units, enabling the option to define alarms associated with values out of the correct operation range. This functionality also offers the possibility of incorporating the read values to the vehicle status in order to analyse its behaviour over time. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the workshop can be obtained. Diagnostics warning Additional actions

ARE YOU INTERESTED IN JALTEST DIAGNOSTICS?

Anchor Bottom