Home
Jaltest Diagnostics
WHERE TO BUY JALTEST?
DIAGNOSTICS
TELEMATICS
ISOBUS
OEM
MILITARY
UNIVERSITY
MY ACCOUNT
Cart
REQUEST INFORMATION
Online Catalog   ONLINE CATALOG

Coverage

FIND OUT ALL OUR COVERAGE
All coverage
What are you looking for?
TRACTOR HARVEST EQUIPMENT SELF-PROPELLED AND TRAILING IMPLEMENT ISOBUS
OHW - HEAVY EQUIPMENT OHW - COMPACT EQUIPMENT STATIONARY ENGINE MULTI-PURPOSE VEHICLE
MHE - MATERIAL HANDLING EQUIPMENT
TRUCK BUS LIGHT COMMERCIAL VEHICLE MHE - MATERIAL HANDLING EQUIPMENT AIRPORT EQUIPMENT OHW - HEAVY EQUIPMENT OHW - COMPACT EQUIPMENT STATIONARY ENGINE MANUFACTURER
INBOARD ENGINE OUTBOARD ENGINE STATIONARY ENGINE JET SKI

/ CV / TRUCK / DAF / CF85 IV

ADAS system
ADAS system
Manual Process
Manual Process
Fault code reading
Fault code reading
Measure Values
Measure Values
Components Actuation
Components Actuation
ECU Data
ECU Data
Parameters
Parameters
Calibration
Calibration
Reset
Reset
Real-time data monitoring
Real-time data monitoring
Wiring diagram
Wiring diagram
Vehicle Technical Data
Vehicle Technical Data
Vehicle maintenance
Vehicle maintenance
Diagnostics function with help available
Diagnostics function with help available
SMART Guides
SMART Guides
Model wiring diagrams
Model wiring diagrams
Knorr-Bremse Diagnostics
Knorr-Bremse Diagnostics
Central Services
Central Services

Manual Process: Manual diagnostics process of the system through display codes, blinking codes…

Fault code reading: Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading.

Measure Values: It displays on the screen the values of the different sensors connected to the ECU. It depends on each system.

Components Actuation: They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system.

ECU Data: These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system.

Parameters: Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed.

Calibration: Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly.

Reset: This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics.

Real-time data monitoring: Technical information of the system indicating the checking values, descriptions, graphics, charts…

Wiring diagram: Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier.

Vehicle Technical Data: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values…

Vehicle maintenance: Section in which the maintenance intervals are displayed, indicating the operations to be performed on the vehicle, and through which the reports that make the customers management easier for the repair shop can be obtained.

SMART Guides: Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions!

Model wiring diagrams: Wiring diagrams by model show the relation between all the electrical components of a vehicle. They complement the technical information of the wiring diagrams included in the license and provide detailed specifications about the interconnection of electrical elements, connections to other control units and intermediate connectors.

Knorr-Bremse Diagnostics: An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality

Central Services: Exclusive diagnostics functionalities with remote assistance

CF85 IV

General vehicle information: Technical information of vehicles including all the engine technical data, tightening torques, capacities, graphics and other checking values… Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! Wiring diagrams by model show the relation between all the electrical components of a vehicle. They complement the technical information of the wiring diagrams included in the license and provide detailed specifications about the interconnection of electrical elements, connections to other control units and intermediate connectors.
System ADAS system Manual Process Fault code reading Measure Values Components Actuation ECU Data Parameters Calibration Reset Real-time data monitoring Wiring diagram SMART Guides Knorr-Bremse Diagnostics Central Services
Antipollution EAS/EAS-2, Exhaust gas treatment system ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Antitheft ALS-S, Alarm ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Antitheft CDS-3, Central locking system ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Antitheft Immobiliser ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Auxiliary brakes EST-42, Retarder ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Auxiliary brakes EST-52, Retarder ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Brakes ABS E, Antilock braking system ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Brakes ABS/ASR D/E, Antilock braking system ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Brakes EBS 2 CAN, Electronic Braking System ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality Exclusive diagnostics functionalities with remote assistance
Brakes EBS 2, Electronic Braking System ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Central computer VIC-2, Vehicle Intelligence Centre ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Central computer VIC-3, Vehicle Intelligence Centre ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality Exclusive diagnostics functionalities with remote assistance
Chassis module BBM, Bodywork Module ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Data registration, telematics and FMS FMS, Fleet Management System ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Data registration, telematics and FMS Telephone ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Engine DMCI, Diesel Multi-Controlled Injection ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality Exclusive diagnostics functionalities with remote assistance
Gearbox AS Tronic, Gearbox with electronic control ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Gearbox AS Tronic, Parameter setting of the gearbox ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Heater ACH-EA, Air additional heater ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Heater ACH-EW, Water additional heater ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Instrument cluster DIP-4, Instrument cluster ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Maintenance Service-2, Maintenance system ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Maintenance Service-3, Maintenance system ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Safety LDWA/LDWS, Lane Departure Warning Assistant ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
- Calibration/Adjustment available without ADAS calibration equipment.
Steering EMAS, Electro-hydraulic multi-axle steering ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Steering SWS-2, Steering wheel ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Steering SWS-3, Steering wheel ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Suspension ECAS-4, Electronically Controlled Air Suspension ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Tachograph DTCO, Digital Tachograph ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality
Tachograph MTCO, Tachograph ADAS system Manual diagnostics process of the system through display codes, blinking codes… Allows to read the ECU failure memory by providing the user information about the fault codes detected in it. This function allows the user to carry out the clearance of the fault code memory; logically if the fault code is active, it will be detected again by the ECU and it will be displayed in the following fault code reading. It displays on the screen the values of the different sensors connected to the ECU. It depends on each system. They are the direct tests that can be done with the system components. For example, actuate an ABS modulator, activate the suspension solenoid valves in order to raise or low the vehicle chassis... They are active diagnostics which, for example, enable tests for engines to calibrate their state, like the cylinder balance, cylinders cut-out or compression, depending on each system. These are the technical data of the ECU, serial number, software version, manufacturer's reference, etc. It depends on each system. Some ECU can operate with different configurations. With this option you can copy configurations and parameters to the control unit, so control units can be programmed in its first installation. For certain systems even the modification of some parameters not affecting the vehicles security is allowed. Some systems ask to calibrate some components for its correct operation. The best examples are the electronic suspensions, for which the reference values must be stored so the ECU can perform the function correctly. This point refers to the reset of the control unit maintenance counters. If the maintenance operations are completed but the maintenance alarm is not canceled, the warning message referring to maintenance will keep on. It has nothing to do with the clearing of the fault codes from the memory, which is part of diagnostics. Technical information of the system indicating the checking values, descriptions, graphics, charts… Detailed diagram of the system containing added information on configuration, components, locations and notes which make the diagnostics tasks easier. Jaltest offers the key to increase efficiency in repair processes. The SMART guides take the user directly to the correct step, according to the vehicle conditions, fault codes and registered parameters. Say good-bye to unnecessary actions! An additional subscription to the Knorr-Bremse Diagnostics module is required to access this functionality

ARE YOU INTERESTED IN JALTEST DIAGNOSTICS?

CONTACT COJALI USA INC.
Cojali USA Inc.
2070 NW 79th Avenue
Doral, Florida 33122, USA

TECHNICAL SUPPORT TEAM
+1 305 960 7651
Call for free:
+1 800 975 1865
customersupport@jaltest.com
Facebook X Instagram YouTube TikTok Linkedin Threads
Cojali
   Copyright © 2025 Cojali S.L. All rights reserved
COJALI
COMPANY
This page uses our own and third-party cookies to improve the navigability and accessibility of our web site and to optimize the user experience. You can click on "Settings" to obtain more information about them and to set or refuse their use.
aenor aenor
European Regional Development Fund
Book a Demo
Anchor Bottom